|View single post by 410customs|
|Posted: Fri Nov 23rd, 2018 02:34 pm||
Joined: Wed May 2nd, 2018
Reputation Points: 5399
|You can use the piece from the old shift motor to turn the t case, or just use vise grips
You can take the old motor apart and keep the gear wheel that meshes with the t case "stub" and use that to turn
To get into 4 low the truck must be stopped and in N
That is dead stop, foot on brake, truck in N (Not in parK!!!)
Or if its a stick the clutch must be pressed in fully
You should be able to switch between 4hi and 2wd pretty easily with vise grips, getting 4 low can be a bit more of a challenge.
In 98 they had vacuum hubs but that is another matter.
Let me know if you are able to shift it?
I build custom RBV, specializing in drivetrain conversions, wiring, suspension and complete custom trucks