Old Bastard !
Joined: Fri Dec 22nd, 2017
Name: Grev B
Occupation: Quality Assurance Engineer
Interests: Rangers, Photography, Metal Bending
Reputation Points: 3042
No problem, I wasn't sure if you were stating a Projector Alignment Method or what... I'm a little slow !
I will watch it !
OK, so I watched it !
The Housings I have fit really nice and are the same manufacturer as the ones I have now, but they are not the wraparound version nor Projectors.
I will fit the housings first just to make sure.
My biggest problem, from my point of view, will be the alignment of the Jig to the housings, which in turn will affect the alignment of the Projectors.
I am going to use the bottom go the Headlight Housing as the flat, hoping I am right in this assumption !
Thanks for the input, I will rewatch that video and a few others before taking the first step with the drill.
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK; now Mike's Welding and Fabrication.
Working on more Mods, just need more time, longer days would work !