Owns A Torsen
Joined: Mon Sep 18th, 2017
Occupation: Design and Innovation
Interests: RBV's, Computers
Reputation Points: 8515
Wait 5 minutes.
On the right and left of the steering wheel there are plastic cover disks about 1" in diameter.
Remove them carefully with a very small screwdriver, they just pop out.
This reveals 2 screws, forgot the socket size but it is metric.
With the 2 screws removed you can pull the airbag forward just enough to get to the connector. The connector is easy to remove, then you can see the rest.
Did you just get pods or pods and wiring or? Getting the connectors out of the old pods can be a pain, I usually pry the covers off first.
HINT: If the covers are already torn to pieces you can push the 2 black tabs enough to get the board out without breaking the tabs! HOWEVER breaking the tabs is kinda normal, there is no way to get the boards out without breaking them if there is a cover on. The new board and the new cover should go right on securely and stay anyway.
Buggman has a tutorial on his youtube channel.
00 XLT 2WD RCSB 5.0 swap Gherkin
00 XLT 4WD XCSB 4.0 G2
00 XLT 4WD RCSB 3.GO! Jalapeño
00 XLT 4WD RCSB Steppie 3.blown. Mistake
99 XL 4WD RCSB 3.0 PJ (Plain Jane)
00 XLT 2WD RC Steppie 2.5 Dee Dee
ALL Amazon Green Metallic