Tree rat eradicator
Joined: Sun Mar 11th, 2018
Interests: Hunting, shooting, reloading, fishing and auto mechanics
Reputation Points: 871
The aftermarket lockout hubs for those trucks are garbage dont even bother.
Convert to a live axle by using the knuckles/unit bearings and cv axles from the explorer or 2000+ Ranger
Then plug and remove the vacuum hub system completely
Live the rest of your life HAPPY!!!
Where does the system start on a '99 Super Cab XLT model Ranger? I've read it starts at a vacuum canister but I've gotten different answers on where it's located. Some say behind the front fenders,some say inside the cab behind the drivers seat behind the panel and some say underneath around the transmission/transfer case area. I really don't want to be tearing it apart in different areas hoping to run into it so a pretty definite answer would be very helpful.
I would follow the lines, you know where it ends, line comes up each side on the steering knuckle (there is an untercut in vac hubbed Rangers to accommodate the lines) and follow it to its starting point. Has to be a valve actuated by the 4wd switch or the transfer case. The canister makes sense since that is a good vacuum supply point but the lines will tell the story.
The fact that the leak could be between the canister and switch or the canister itself I really need to find it,to follow the lines back I'd have to tear into everything which is what I was trying to avoid but I guess I'll have to. Thanks anyway.
1994 Ranger XLT 4x4
1994 F150 XLT
1999 Ranger XLT 4x4