| PM | Quote | Reply | Full Topic |
Joined: Tue Jun 30th, 2020
Posts: 293
Status:
Offline
Reputation: 
Reputation Points: $user_rep
So 99 Mercury mountaineer harness..into a 2000 3.0 ranger..
In my swap..I dont have to move that wire..its already qhere it needs to be. Thats what was confusing me when J said that wire has to be moved. I looked on the ranger side, thwn on thw 99 Mercury harness side ..both pin 26's had that wire there..
So to be sure..I just took the Mountainneer harness apart..well, I took the tape and conduit off and traced it.. all the way from the connecter that plugs into the oil pressure sensor on the 302, all the way back to the 42 pin connector..
its already done.
____________________
2000 EFI 302 Zspec T5 swap ranger