One more for the day... ac wireing. 

Here is what I have going on, just want to make sure before I make a new plug...
I hooked back up the v6 ac harness.. I just need to connect them to the explorer side of things..

 Obviously the yellow is the starter..

Black and green/white to ac compressor..

Red/yellow and black white to low pressure switch by the radiator..


I'll edit this here in a second..have to look at my notes.. :)











 So on this plug, the explore...
Pin 11 is the oil pan wire..than can be depinned and taken out..
Pin 6 will be the ac control(clutch?)
Pin 3 will be the ground 
Pin 5 is starter
Pin 10 im not sure yet... 

Last edited on Mon Sep 7th, 2020 09:43 pm by Junglejoe