| PM | Quote | Reply | Full Topic |
Old Bastard !
Joined: Fri Dec 22nd, 2017
Location: California USA
Posts: 2108
Status:
Offline
Reputation: 
Reputation Points: $user_rep
That will depend on your amp. If the amp is stable at 2 ohms run it in parallel and just turn the volume down on it. Always use the least resistance your amp will handle, it will be higher anyway because of the speaker wires.
When I purchased the amp and the six other speakers, it was purchased from a Matrix that the manufacturer put out, and I thought they were all 4 ohms, so the amp is an 800 watt, 4-Ohm setup.
The Sub is 2-Ohms per leg, so it can be wired for 4-Ohms.
I have to lay-everything out and then chem everything before install.
Got the 10" Enclosure today, tomorrow Fitting to the Cab Starts.
Have you ever seen a "pre-formed front door angled mount" for Ranger ?
____________________
Ltr,
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Hurst Shifter
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK; now Mike's Welding and Fabrication.
Working on more Mods, just need more time, longer days would work !