| PM | Quote | Reply | Full Topic |
Old Bastard !
Joined: Fri Dec 22nd, 2017
Location: California USA
Posts: 2108
Status:
Offline
Reputation: 
Reputation Points: $user_rep
It would take 10-3/4 to fit under that lip, that's why I wanted to go custom. I am even considering 8" to stay under lip with an enclosure. I removed the jack so I can do 2.
I don't know if you have had your carpet out but that hump at the bottom half way across right behind the driver seat.... that is molded in the carpet. Replace the carpet and it is gone!
With aftermarket carpet, I thought I measured 11" but either way I will cut a notch out of the back of the box.
From what I see, I should be able to reverse and flip the cut out piece and glue and clamp it back; I will use my table saw to make the cuts and both cuts will be from a flat straight surface ... hoping the cuts will be straight enough to do the flip of the piece being cut.
I will lose some space in the box but it is on the large side of the space allowed for the speaker, it shouldn't matter and the fact that I haven't heard this sub and enclosure before it shouldn't matter.
I got the front grille yesterday in the mail, it is bigger than I was thinking, maybe I should have gotten a 8" Woofer.
My Jack and OEM Floor material has been removed for over six years, the Trans Shift Oil Leakage has damaged this carpet, looks like I maybe buying new AGAIN !
My plan is one 10" Sub, nothing to speak of just want clean Bass. The unit will be centered so hoping for the best.
I didn't think when buying the Sub Speaker... I bought a dual coil speaker this time around, I can wire it parallel or serial, I'm thinking parallel connected but I need to read some more.
Ltr
____________________
Ltr,
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Hurst Shifter
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK; now Mike's Welding and Fabrication.
Working on more Mods, just need more time, longer days would work !