|View single post by JAMMAN|
|Posted: Mon Jun 11th, 2018 09:56 pm||
Owns A Torsen
Joined: Mon Sep 18th, 2017
Reputation Points: 8387
|That does it. Carburetor.
It isn't the return line that is bugging me it is taking the regulator off the fuel pump. The return line would be virtually blocked until the pressure reaches the 60+ PSI if I am thinking correctly.
There is a return line but it is at the fuel filter back to the tank, goes to that regulator.
So I have to pull the bed or drop the tank a little to get the fuel pump out AND getting those things out is a chore.
I will consider all my options. I have read at least one article where they just replaced the rail and it did work.
00 XLT 2WD RCSB 5.0 swap Gherkin
00 XLT 4WD XCSB 4.0 G2
00 XLT 4WD RCSB Steppie 3.blown. Mistake
00 XLT 4WD RCSB 3.GO! Jalapeño
I don't wear a mask and I have no regrets (Brent Smith)