|View single post by Scrambler82|
|Posted: Tue Mar 20th, 2018 08:33 pm||
New Audio On The Way !
Joined: Fri Dec 22nd, 2017
Reputation Points: 2694
|So what you need to do is slide the seat in the position it fits you and then jack it up to level it and bolt it in !
Until you can locate another set of seats.
You have to decide who will be driving the truck and what position is best, either crooked with a sliding track, or static and level, the problem here is the welded tracks, if they were bolted on then some washers under the seat might help for a while.
Too bad the Seats weren't straighter, would have made things a lot easier.
Have you looked at Explorer Seats, maybe you can find some without power and cloth covers, since you have an extended cab the Explorer seat would work out.
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK; now Mike Welding and Fabrication.
Working on more Mods, just need more time, longer days would work !