New Audio On The Way !
Joined: Fri Dec 22nd, 2017
Name: Grev B
Occupation: Quality Assurance Engineer
Interests: Rangers, Photography, Metal Bending
Reputation Points: 2512
I did my entire interior with RAAMAT. Cheaper than other things out there but just as good. I did my doors first and I can tell you that they close now with a considerable "clunk" Very solid. I did the floor, ceiling (what I could around the sunroof), and back panel behind the seats. I then used their foam on top of the RAAMAT ensolite. The entire cabin is much quieter and I will add that it also holds heat in better during winter and holds cold in better during summer when AC/blower is on. It also helps if you close off any open holes. There is a rather large one in the door panel. Use a piece of sheet metal and screw it in then cover with sound deadening material and it will be a lot more quiet.
I'm glad I did it to my truck a couple years back.
Sounds like a good project.
I used FatMat, lower priced alternative to Dynamat but still need to do the doors.
2003 EDGE, Std Cab, Steppie, E4 Red, 5sp, 4x
5" SuperLift, 33" x 12.50 x 15"
Mod'd Backrack to fit Steppie
Front and Rear Bumpers by Custom 4x4 Fabrication, OK.
Working on more Mods, just need more time, longer days would work !